Tailor made firearm solutions for quality and precision
Some of our recent projects. Mouse-over for more information.
Enfield falling block in 45-70, 33″ straight barrel with action gKRG Wiskey 3 stock (grafted onto the action among other modifications) and finished in Duo-tone Cerakote Burnt Bronze with Graphite black.
Enfield falling block in 45-70, 33″ straight barrel with action gKRG Wiskey 3 stock (grafted onto the action among other modifications) and finished in Duo-tone Cerakote Burnt Bronze with Graphite black.
Transformation complete – 300 blackout with extractor work, fluting and rail
Rapid target acquisition made easier with bushing compensator, new sights and a full trigger job on this 45acp.
A two port muzzlebrake design fitted to a fluted Kreiger barrel, completed with Cerakote in Coyote Tan.
An example of spiral fluting to a bolt.
Ever wondered what the inside of a barrel looks like? Here you can see the chamber leading into the rifling and lands.
Examples of Cerakote and custom muzzle brakes
Thread protector matched to the barrel, including Cerakote.
Beretta 92fs upgraded with barrel bushing and full trigger job including overtravel and creep, tricked out with duo-tone Cerakote (burnt bronze and armour black) and polishing.
Muzzlebrakes can be fabricated in an endless variety of styles for all calibres.
G34 slide complete with hand -abricated compensator and Cerakote (9mm major IPSC racegun).
A custom request muzzlebrake during milling processes.
Turned down barrels ready for Cerakoe with muzzlebrake blanks.
Ruger Mk3 Milspec Cerakoted in OD Green.
Cerakoting the barrel creates a quality finish that’s hard wearing and stylish.
Along with duo-tone Cerakote, this Sako A7 ugrade included a custom bolt.
A new bolt shroud is a feature of this Sako A7 upgrade.
Custom made thread adaptor, pictured during install between barrel and custom 3 port muzzlebrake. n ideal solution for fitting a brake to non-standard size barrels.
A threaded barrel pictured with a thread cap.
A thread cut into the end of a barrel to accommodate a muzzlebrake or thread cap.
A three-port muzzle brake design completed with Cerakote. Pictured fitted to a fluted Kreiger barrel.
Barrel flutes highlighted with Cerakote
Cerakote highlights accentuate the bolt fluting
Ultimatum action and bolt finished in a custom Cerakote duo tone
Studs included in the Grayboe stock
Greyboe stock, fluted Swan barrel, Accurate Mag mags and Cerakoted bolt
Custom duo tone Cerakote to fluting, custom brake and bolt
One of our customised CZ452 22LR rifles competing in the Impact Dynamics Rimfire Challenge with modified adjustable stock and tweaked trigger
Nik tackles the River Raid stage in day two of the Impact Dynamics Rimfire Challenge on his customised CZ452 22LR
PRP Modular Chassis (body finished in Kryptech Cerakote, quad rail foreend in black)
A little Titanium Cerakote to the slide makes a big difference
Aussie made Flash Hider and blast shield in Coyote Tan
Our custom picatinny rails come up to 24″ long – but length isn’t everything, right?
100% Aussie made pic rails by our Adelaide gunsmiths with lifetime warranty
Our gunsmiths customised ejection port clearance to suit the rifle
Gunsmith made picatinny rails. Custom created to suit your firearm in almost any size.
Vortex Viper fitted to a Colt 1911 thanks to custom pic rail fabricated by our gunsmiths
Vortex Viper fitted to a Colt 1911 with an ICEng custom picatinny rail
Custom pic rail and modifications to fit Vortex Viper to Colt 1911
Blue and Red barrel clamps, magazine nuts and followers created by the talented ICEng team for Adler and other 12ga shotguns.
Aftermarket mag nuts and followers in silver, blue and red on Pardus, Uzkon and Adler.
Old is new: This much loved 9mm Trojan Spartan is given a new lease on life with fresh Cerakote, new barrel and bushing, Novak sights and front grip checkering
New Novak front and rear sights compliment the ease of use and looks of the makeover to this Trojan Spartan 9mm
Spartan 9mm finished in Cerakote Magpul FDE, upgraded with Novak sights, new bushing and barrel and front grip checkering
7-shot Pardux LAX12 Lever Action Shotgun fitted with a +2 ICEng magazine extension. Pictured in OD Green. To reconvert just unscrew the kit and screw on the original end piece.
Cerakote can be applied to most parts of your firearm, including the rings and bipod, to create a polished look that keeps your firearm protected.
An ICEng Custom AusCam pattern stock (using Cerakote) gives this build a unique look and compliment the Cerakoted barrel and action
Choosing the right Cerakote colour can create that eye catching look
Increase reliability and consistency with a M16 extractor upgrade to your bolt
Reduces muzzle flash, ideal for night shooting and use with a thermal scope.
The barrel clamp with rail and the +2 and the +5 extension tubes
The custom compensator started as solid steel.
After machining: this compensator was designed and manufactured by Ignition Custom Engineering to transform a Tanfoglio XL4in 38 super into a custom IPSC handgun.
A custom compensator in early machining stages.
A top view outlining the compensator design on a custom Tanfoglio XL4in 38 super reworked into a custom IPSC handgun with worked hammer, trigger, custom ICE compensator and Cerakote. If you look closely through the barrel port, you can see the barrel un Burnt Bronze and lubricant (its freshly oiled ready for use).
This Tanfoglio XL4in 38 super was reworked into a custom IPSC handgun with worked hammer, trigger, custom ICE compensator and Cerakote.
The finished 300 blackout in the hands of Jess of Hunter & Huntress
Attention seeker: This RPR has been transformed with a custom Cerakote including Kryptech and snakeskin (Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends.)
Underneath the Kryptech shroud lies a snakeskin finished barrel. Ceraoke colours include Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends.
Ruger Precision Rifle butt stock Cerakoted in Flat Dark Earth with Burnt Bronze highlights, contrasted with factory black accessories.
Its all in the detail: Snakeskin finish to the barrel, custom Kryptech to the shroud foreend. Cerakote colours include Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends.
Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends of Cerakote create a unique Kryptech and Snakeskin finish to this Ruger Precision Rifle.
One of a kind: a unique Cerakote finish including Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends. The barrel is finished with a snakeskin pattern.
A unique Kryptech blend Cerakote including Coyote Tan, Fat Dark Earth, Burnt Bronze and custom blends.
